Announcement

Collapse

HUG - here for all audio enthusiasts

INTRODUCTION- PLEASE READ FIRST TO UNDERSTAND THIS FORUM!

"This Harbeth User Group (HUG) is the Manufacturer's own managed forum dedicated to natural sound, realisable by controlling the confounding variables between tthe microphone and the listeners' ears.

For example, the design of and interaction between the hifi amplifier and its speaker load can and potentially will alter the sound balance of what you hear. To reproduce the sounds captured by the recording microphones, as Harbeth speakers are designed to do, you would naturally select system components (sources, electronics, cables and so on) that do not color the sound before it reaches the speakers.

Identifying components for their system neutrality should, logically, start with the interpretation and analysis of their technical, objective performance, as any and every deviation from a measurably flat frequency response at any point along the serial chain from microphone to ear is very likely to cause the total system to have an audible sonic personality. That includes the contribution of the listening room itself.

HUG specialises in making complex technical matters simple to understand, aiding the identification of audio components likely to maintain a faithful relationship between the recorded sound and the sound you hear. With our heritage of natural sound, HUG cannot be really be expected to guide in the selection, approval, endorsement or even discussion of equipment that is intend to introduce a significantly personalised sound to the audio signal chain. For that you should do your own research and above all, make the effort to visit an Authorised Dealer and listen to your music at your loudness on your loudspeakers through the various electronics offered there. There is no on-line substitute for that time investment in a dealer's showroom.

If you desire to intentionally tune your system sound to your personal taste, please consider carefully how much you should rely upon the subjective opinions of strangers. Their hearing acuity and taste will be different to yours, as will be their motives and budget, their listening distance, listening loudness and listening room treatment, not necessarily leading to appropriate equipment selection and listening satisfaction for you.

Alternatively, if faithfully reproducing the sound intended by the composer, score, conductor and musicians over your speakers is your audio dream, then understanding something of the issues likely to fulfill that objective is what this forum has been helping with since 2006. Welcome!"


Jan. 2018
See more
See less

A peculiarly British obsession with steam?

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • A peculiarly British obsession with steam?

    We British are an interesting lot. We have an enviable heritage of which we can be and are truly proud; many facets of which we actively pursue obsessively on an individual basis to the detriment of home life and marriage!

    We rebuild old cars, we call them vintage, that should have been scrapped years ago and the component parts recycled into more efficient machinery, and drive them around the countryside in the summer to “rallies”.
    We have museums filled with relics of the past which we visit on Sundays, we fly 60 year old aircraft over wedding celebrations, and we venerate our older engineering triumphs by restoring surviving examples to working order despite the cost to our ailing finances. Windmills, watermills, coal mines and water pumping stations come to mind. But for me the most important British invention is, after the Harbeth loudspeaker, the steam engine.

    It is preserved in more guises in Britain than almost anywhere else in the world. In the UK there are over 300 preserved steam railway locomotives, the majority rebuilt from scrapped wrecks rejected in the early 1960s by British Railways, and on most weekends of the year there are steam-powered charter services running the length and breadth of the country.
    There are also a large number of steam powered road and farm vehicles, rebuilt and in full insured working order, which can be seen at rallies up and down the country nearly all year round.

    Recently a quite special event was organised as part of one of these rallies. For a long time there has been a vintage car rally and now a vintage commercial vehicle rally from London to Brighton, co-incidentally passing within a few miles of the Harbeth factory. This year a group of owners and enthusiasts of steam road haulage, the Horsham Traction Company, decided to emulate what was once a common event on the UKs roads, and transport an electrical power supply transformer on its 1930s trailer, from London to Brighton on 1st May. This group of enthusiasts based at a modern day plant hire and heavy haulage business in Surrey have at their disposal the means to organise an event such as this and regularly entertain enthusiasts at the rallies they visit, with prodigious feats of haulage. One of the engines, Boadicea, has pulled a 145 ton load unaided up a 1 in 12 slope (8.5%) at the great Dorset steam Fair!

    http://www.justgiving.com/Utils/imag....jpg&width=250

    There were three road locomotives taking part, Burrell 6NHP Road Loco ‘ His Majesty’ taking the lead , then Mclaren 10NHP Road Loco ‘Boadicea’, and Fowler 8NHP Road Loco ‘The Great North’ as brake engine at the rear. There was a crew on the trailer to man the brakes too.

    There are several privately taken videos on Youtube.com (search for Horsham Traction) which will give you a sense of the power and fascination of these machines, once the epitome of British engineering.

    http://www.justgiving.com/horsham-tr...on-to-brighton
    http://youtu.be/u7HfW68TaAo

    There is also a page on Facebook for those with access:
    http://www.facebook.com/horshamtract...=wall&filter=2

    For UK steam railway videos on YouTube try http://youtu.be/nGkvhwNWys0 or http://youtu.be/5Hq7nl9NpCU for starters! There are hundreds of enthusiast videos there.
    Last edited by Paul G Smith; 14-05-2011, 06:02 PM. Reason: added info
    Paul

    "If all else fails, read the instructions"
Working...
X