Announcement

Collapse

HUG - here for all audio enthusiasts

INTRODUCTION- PLEASE READ FIRST TO UNDERSTAND THIS FORUM!

"This Harbeth User Group (HUG) is the Manufacturer's own managed forum dedicated to natural sound, realisable by controlling the confounding variables between tthe microphone and the listeners' ears.

For example, the design of and interaction between the hifi amplifier and its speaker load can and potentially will alter the sound balance of what you hear. To reproduce the sounds captured by the recording microphones, as Harbeth speakers are designed to do, you would naturally select system components (sources, electronics, cables and so on) that do not color the sound before it reaches the speakers.

Identifying components for their system neutrality should, logically, start with the interpretation and analysis of their technical, objective performance, as any and every deviation from a measurably flat frequency response at any point along the serial chain from microphone to ear is very likely to cause the total system to have an audible sonic personality. That includes the contribution of the listening room itself.

HUG specialises in making complex technical matters simple to understand, aiding the identification of audio components likely to maintain a faithful relationship between the recorded sound and the sound you hear. With our heritage of natural sound, HUG cannot be really be expected to guide in the selection, approval, endorsement or even discussion of equipment that is intend to introduce a significantly personalised sound to the audio signal chain. For that you should do your own research and above all, make the effort to visit an Authorised Dealer and listen to your music at your loudness on your loudspeakers through the various electronics offered there. There is no on-line substitute for that time investment in a dealer's showroom.

If you desire to intentionally tune your system sound to your personal taste, please consider carefully how much you should rely upon the subjective opinions of strangers. Their hearing acuity and taste will be different to yours, as will be their motives and budget, their listening distance, listening loudness and listening room treatment, not necessarily leading to appropriate equipment selection and listening satisfaction for you.

Alternatively, if faithfully reproducing the sound intended by the composer, score, conductor and musicians over your speakers is your audio dream, then understanding something of the issues likely to fulfill that objective is what this forum has been helping with since 2006. Welcome!"


Jan. 2018
See more
See less

Which subwoofer have you paired with your Harbeths?

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Which subwoofer have you paired with your Harbeths?

    What subwoofer have you paired with your Harbeths? Looking for suggestion to fill the lower frequencies on my C7 setup.

  • #2
    ACI Force XL (Mono). Works quite well with SHL5.

    Comment


    • #3
      tried single and dual (as stereo, L and R) SVS PB10 active sub with external anologue xo and electrical + digital external xo + external digital room eq and also REL Strata 3 and 5 w/o any external xo and room eq.

      Currently using a old REL strata mk1 with my c7 running full range. Still fine tweaking the sub due to some room mode issue.
      "Bath with Music"

      Comment


      • #4
        REL R505 with my SHL5s

        Comment


        • #5
          I'll be demo-ing at JL Audio F110 vs a REL B3 tomorrow and will report back my findings. Thanks for the R-505 suggestion, I'll see if they have one in stock I can demo as well.

          Comment


          • #6
            REL R500 with my C7's - great results.

            Comment


            • #7
              Demo'd both subs for about 2 hours in store and ended up ordering the B3 in Cherry :-)

              Comment


              • #8
                REL is always good for music.
                "Bath with Music"

                Comment


                • #9
                  B&W ASW750s for me
                  Paul

                  "If all else fails, read the instructions"

                  Comment


                  • #10
                    Rel b-3

                    REL B-3 with C7ES3. Excellent results.

                    Comment


                    • #11
                      Just a small contribution from the sub ...

                      Rythmik F12SE with my SHL5. I like it because the of the precise low pass crossover point and the phase adjustments which is very important for proper integration with the main speakers. It is cheap and well built. I did audition other subs like Velodyn, Sunfire and Rel but nothing gave me the control like the Rythmik considering that you only need very little bass extension with the Super5.

                      Beware though, you are not going to hear the sub often ( if you have set up correctly) unless you want the extra bass that is not part of the original recordings.

                      ST

                      Comment


                      • #12
                        REL Storm

                        I use a REL Storm V with SHL5's in my 30m2 listening room.
                        It integrates very well and just adds a nice and solid fundament for the music in my room.
                        Happy listener

                        Comment


                        • #13
                          REL Strata

                          Similar to the comment above, my 10 year old REL Strata III works seemlessly with the SHL5s in a 10'x20'x8' room.

                          Comment


                          • #14
                            Velodyne DD10

                            Velodyne DD10. Significantly better than any REL out there.

                            Comment


                            • #15
                              BK Electronics subs

                              BK XXLS400 here. BK Electronics is a small British company that sell direct. Subs have high level connections so can be connected to the speaker outputs of your amplifier and the crossover/volume set independently (and a remaining line-level connections used separately for home cinema purposes).

                              Comment

                              Working...
                              X