Announcement

Collapse

HUG - here for all audio enthusiasts

Since its inception ten years ago, the Harbeth User Group's ambition has been to create a lasting knowledge archive. Knowledge is based on facts and observations. Knowledge is timeless. Knowledge is human independent and replicatable. However, we live in new world where thanks to social media, 'facts' have become flexible and personal. HUG operates in that real world.

HUG has two approaches to contributor's Posts. If you have, like us, a scientific mind and are curious about how the ear works, how it can lead us to make the right - and wrong - decisions, and about the technical ins and outs of audio equipment, how it's designed and what choices the designer makes, then the factual area of HUG is for you. The objective methods of comparing audio equipment under controlled conditions has been thoroughly examined here on HUG and elsewhere and can be easily understood and tried with negligible technical knowledge.

Alternatively, if you just like chatting about audio and subjectivity rules for you, then the Subjective Soundings sub-forum is you. If upon examination we think that Posts are better suited to one sub-forum than than the other, they will be redirected during Moderation, which is applied throughout the site.

Questions and Posts about, for example, 'does amplifier A sounds better than amplifier B' or 'which speaker stands or cables are best' are suitable for the Subjective Soundings area.

The Moderators' decision is final in all matters regarding what appears here. That said, very few Posts are rejected. HUG Moderation individually spell and layout checks Posts for clarity but due to the workload, Posts in the Subjective Soundings area, from Oct. 2016 will not be. We regret that but we are unable to accept Posts that present what we consider to be free advertising for products that Harbeth does not make.

That's it! Enjoy!

{Updated Nov. 2016A}
See more
See less

Modifying your Harbeths - real benefits or not?

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Re: Accessories for your Harbeths

    Hej Massimo,

    Look at this picture from CES: http://blog.stereophile.com/rmaf2007/Harbeth-450.jpg. I think those are Syland stands on the right that were at RMAF 2008. But the subject of high mass vs. open stands is a topic of hot debate, esp. with respect to the minis. I am not sure where Alan Shaw stands on this topic, nor I.

    Comment


    • #17
      Re: Accessories for your Harbeths

      Hi Dimosko,

      The Epos stands that you have are the correct height for the Compact - 7 and you may be able to add a bit of Mass by filling the legs with fine sand. If there are no holes there already you may be able to drill some and later covet them with black tape or sticker. You can also add to the performance by having an MDF board cut to the same size as the cabinet and the fitted to the top of the stand with Blue-Tac. Then place 4 Polyurethane Bumpons athe corners directly under the cabinets. This board will act to dampen Resonances that may migrate back from the steel. Supporting the cabinet out near the corners will also alow the bottom panel to very slightly flex as intended. Be sure to use pointed feet if on a carpet floor as this will add to stability and give overall best imaging.

      Noel.

      Comment


      • #18
        Re: Accessories for your Harbeths

        This is the second time today I've read recommendations for sand filling Epos style stands...

        There definitely seems to be two views on Harbeth stands. The ones I like (for UK rooms anyway) is the rigid, light, carbon pad decoupled one specially made by "Something Solid," which I found to "open them up" - sorry Alan...

        In more bass absorbent rooms, it seems that wooden or heavy metal stands seem the way to go - interesting.

        P.S. I used 12.7mm dia, 3.5mm thick approx clear plastic feet to sit the speakers on, one at each corner, and these were great. Dealers in the UK can get these from RS Components and I found they extended the life of demonstrator speakers too, as well as letting the cabinets flex slightly as designed.
        Last edited by DSRANCE; 01-02-2008, 02:50 PM. Reason: Corrected clear feet dimensions

        Comment


        • #19
          Re: Accessories for your Harbeths

          Originally posted by DSRANCE View Post
          This is the second time today I've read recommendations for sand filling Epos style stands...

          There definitely seems to be two views on Harbeth stands. The ones I like (for UK rooms anyway) is the rigid, light, carbon pad decoupled one specially made by "Something Solid," which I found to "open them up" - sorry Alan...

          In more bass absorbent rooms, it seems that wooden or heavy metal stands seem the way to go - interesting.

          P.S. I used 3.6mm dia, 1.5mm thick approx clear plastic feet to sit the speakers on, one at each corner, and these were great. Dealers in the UK can get these from RS Components and I found they extended the life of demonstrator speakers too, as well as letting the cabinets flex slightly as designed.
          Please provide the part number for the "clear plastic feet" and which section of the catalogue ..electrical, mechanical..


          Thanks

          Comment


          • #20
            Re: Accessories for your Harbeths

            The current stock number is 248 - 451

            Home >Mechanical Components> Anti-Vibration Mounts and Feet> Anti Vibration Feet

            I'm sorry, I got the original dimensions completely wrong.....

            - Height 3.5mm, dia 12.7mm - clear or grey (I always used the clear ones as I often fitted them to small speakers that were sitting on a metal "display shelf" but it doesn't matter.

            Hope this helps......

            Comment


            • #21
              Re: IKEA Lack stands. IMPORTANT UPDATE Jan 2008

              Originally posted by A.S. View Post
              ...of Ikea "Lack" side table - I have bought two for experimental use under Monitor 40.1
              In the light pink finish I trust ;-)

              http://www.ikea.com/gb/en/catalog/products/40104270

              Comment


              • #22
                Re: IKEA Lack stands. IMPORTANT UPDATE Jan 2008

                That's the very one! Only available in a beach effect.

                Now, this stand is quite a bit bigger than the original one used under Compact 7ES3 and bigger than the M40 - M40.1 itself. I have noticed that the top board sounds rather hollow to the knock and as a precaution, I'm going to staple some roofing felt (the dry type) onto the underside to mass-damp it, just as you would a thin-wall cabinet. Tempting though it may be, do not apply (liquid) bitumen rubber because you will not be able to eradicate the smell.
                Alan A. Shaw
                Designer, owner
                Harbeth Audio UK

                Comment


                • #23
                  Re: Accessories for your Harbeths

                  Not sure this is the appropriate section but it is the closest I've found.

                  I was wondering if anyone else shared my belief that brown rather than black might be more pleasing to the eye when it comes to speaker grilles? There are references on the Harbeth site, and I dare say in the literature, to speakers 'disappearing' in domestic environments (If I recall corerctly, the smaller dimensions of the Monitor 30 are said to help in this regard), but I think that black makes speakers more imposing (i.e., noticeable) than they need be. Given the care taken to finish the speakers in attarctive veneers, might something other than black round the aesthetic off? A couple of other manufacturers do this (Tannoy and Quad spring to mind) and I was wondering if it's been considered at Harbeth? Not that it's a clincher - I ordered my C7s the other day and am looking forward tremendously to them arriving. I'd have fewer worries on the domestic front if they had brownish rather than black fronts on them though.....

                  Comment


                  • #24
                    Re: Accessories for your Harbeths

                    Originally posted by Kevin M View Post
                    Not sure this is the appropriate section but it is the closest I've found.

                    I was wondering if anyone else shared my belief that brown rather than black might be more pleasing to the eye when it comes to speaker grilles? There are references on the Harbeth site, and I dare say in the literature, to speakers 'disappearing' in domestic environments (If I recall corerctly, the smaller dimensions of the Monitor 30 are said to help in this regard), but I think that black makes speakers more imposing (i.e., noticeable) than they need be. Given the care taken to finish the speakers in attarctive veneers, might something other than black round the aesthetic off? A couple of other manufacturers do this (Tannoy and Quad spring to mind) and I was wondering if it's been considered at Harbeth? Not that it's a clincher - I ordered my C7s the other day and am looking forward tremendously to them arriving. I'd have fewer worries on the domestic front if they had brownish rather than black fronts on them though.....
                    Personally my preference for grilles is still black though i would prefer the foam grille (like old HL-5) or the tygan one like those used on the old Rogers studio 1 & LS-3/5A. In fact black matches easily into most home decos as compared to brown though i understand that brown grilles like those used on Tannoy prestige range gives a more classic look.

                    Comment


                    • #25
                      Re: Accessories for your Harbeths

                      Can a Compact 7 stand made from solid granite / marble???What probable sound will it be...

                      Comment


                      • #26
                        Re: IKEA Lack stands. IMPORTANT UPDATE Jan 2008

                        Originally posted by A.S. View Post
                        Today I visited the IKEA store in south London to investigate the comment made here recently that IKEA have changed the dimensions of the stand. It seem to be true. Originally, they sold this Lack product as a plant-pot stand, but they now seem to have redesigned it as a mini-table with a much increased top-plate. I have bought two for experimental use under Monitor 40.1.

                        The IKEA part number is now: 401.042.70. The top plate measures 55cm x 55cm and when assembled, the bottom of the speaker will sit 45cms above the floor (about 18 inches) - rather tall for M40.1. This larger top plate is now really too big for all but the M40/M40.1 and even so, is bigger than the speaker's footprint: it doesn't look great but will get you going.

                        I strongly suggest that you invest in proper, approved stands like the Skylan or Brooke's stand as shown at our CES room, Jan. 2008.
                        Update.

                        The beloved lak mini-stand (high enough to accommodate 12" minis) survived a few extra years in Denmark and I was shipping them out as fast as i could get them, even after the catalog dropped them. I kept pushing up the price to cut the volume, and when that didn't work i just stopped. I'm old.

                        Well, they ARE really gone, now, according to my original inside source.

                        Too bad for mini-owners, as this stand was really quite good for all the LS3/5As and close relatives. It's funny, you'd think for a single spec-type speaker, like the "original" LS3/5As, that one stand would be optimal for all of them. But that wasn't true at all. Some liked low mass stands, some sounded better on high mass stands, but of course that was also a function of the ears and preferences of the individual. I have now owned and sold all but 1 of 3 different LS3/5A-types (and i am not saying which ones) and I have "interviewed" the Harbeth and Spendor relatives. The old Lak stand was not the absolute best for any of them to my ears, but it sounded very good on all of them.

                        I have never owned the bigger Harbeth or Spendor boxes for which a shorter Lak stand still survives. I don't have the room for them, but if the shorty is anything like the taller one that has been discontinued and if you are not fond of shedding several (or more) ?100 notes every 2-3 years for the latest metal rage, try it.

                        Comment


                        • #27
                          Re: Accessories for your Harbeths

                          Originally posted by bbtan View Post
                          Can a Compact 7 stand made from solid granite / marble???What probable sound will it be...
                          Sure why not, but that might render the sound dead & lacking in air. Those metal stands that Tropical Audio supplies with their Harbeth speakers are good enough.

                          Comment


                          • #28
                            Re: Accessories for your Harbeths

                            Originally posted by Gan CK View Post
                            Sure why not, but that might render the sound dead & lacking in air. Those metal stands that Tropical Audio supplies with their Harbeth speakers are good enough.
                            The metal stand supplied by T/Audio seem to be very flimsy.....tq

                            Comment


                            • #29
                              Re: Accessories for your Harbeths

                              Originally posted by bbtan View Post
                              Can a Compact 7 stand made from solid granite / marble???What probable sound will it be...
                              I used 26" granite stands under my Harbeth HP3s. They sounded absolutely fine. The stands were too tall and narrow for my Compact 7s, though. As I wrote some months ago, I used coffee tables with large dictionaries for the C7s until I could get some metal stands made. The metal stands firmed up the bass a bit, but I can endorse Alan's claim that the kind of stand does not seem to matter much with Harbeth 'speakers. As he put it (if I remember correctly), you could use a pile of telephone directories. From my experience, I agree.

                              David

                              Comment


                              • #30
                                Since this thread is dedicated to "Accessories" in general, I have one that I would like to share and suggest to Harbeth users: I bought (8) 3/16"ID by 1/2"OD Herbie's Grungebuster washers and placed them on the back side of the Radial drivers in my M-30's with a metal washer over top of them. Teflon washers are also available through Herbie's. This process involves removing the front panel of the speakers and takes about 15-20 minutes, so I wasn't able to do a quick side by side comparision, however, I'm convinced that it made a slight improvement. Lower frequencies are less "muddy"; tighter and more impactful. During fortes or crescendos, I am better able to distinguish groups of instruments. The sound seems to have an improved focus. I don't exactly recall the price of these washers, but its safe to say that you could do it for under $10 (US). It will also give you an opportunity to have a look inside your Harbeths (if you haven't already).

                                Comment

                                Working...
                                X