HUG - here for all audio enthusiasts


"This Harbeth User Group (HUG) is the Manufacturer's own managed forum dedicated to natural sound, realisable by controlling the confounding variables between tthe microphone and the listeners' ears.

For example, the design of and interaction between the hifi amplifier and its speaker load can and potentially will alter the sound balance of what you hear. To reproduce the sounds captured by the recording microphones, as Harbeth speakers are designed to do, you would naturally select system components (sources, electronics, cables and so on) that do not color the sound before it reaches the speakers.

Identifying components for their system neutrality should, logically, start with the interpretation and analysis of their technical, objective performance, as any and every deviation from a measurably flat frequency response at any point along the serial chain from microphone to ear is very likely to cause the total system to have an audible sonic personality. That includes the contribution of the listening room itself.

HUG specialises in making complex technical matters simple to understand, aiding the identification of audio components likely to maintain a faithful relationship between the recorded sound and the sound you hear. With our heritage of natural sound, HUG cannot be really be expected to guide in the selection, approval, endorsement or even discussion of equipment that is intend to introduce a significantly personalised sound to the audio signal chain. For that you should do your own research and above all, make the effort to visit an Authorised Dealer and listen to your music at your loudness on your loudspeakers through the various electronics offered there. There is no on-line substitute for that time investment in a dealer's showroom.

If you desire to intentionally tune your system sound to your personal taste, please consider carefully how much you should rely upon the subjective opinions of strangers. Their hearing acuity and taste will be different to yours, as will be their motives and budget, their listening distance, listening loudness and listening room treatment, not necessarily leading to appropriate equipment selection and listening satisfaction for you.

Alternatively, if faithfully reproducing the sound intended by the composer, score, conductor and musicians over your speakers is your audio dream, then understanding something of the issues likely to fulfill that objective is what this forum has been helping with since 2006. Welcome!"

Jan. 2018
See more
See less

Tweeter question about new P3ESR SE

  • Filter
  • Time
  • Show
Clear All
new posts

  • Tweeter question about new P3ESR SE


    Just a quick question, I received a new pair of P3ESR today, and I noticed that there's a clear circular sticker on the inside of the tweeter protection 'cage'.

    Is this normal? Does it need removing? It looks like it could mask the sound a little. I own some M30, and they don't have this.

    Thanks in advance

    {Moderator's comment: DO NOT TOUCH IT. It is part of the design.}

  • #2

    OK, thanks.

    But... if it's just a sticker, will it fall to the bottom at some point?

    {Moderators comment: fitted to all P3s/M20s made since 1990 (and other Harbeths too), twenty two years ago. Why are you so anxious about what is a standard feature? Look here. Full comprehensive thread here.}


    • #3

      No worries, thanks for the insight. Just didn't know it was supposed to be there, and it looked like it might drop off!

      Anyway, I'm sure it will be fine.

      {Moderator's comment: the phase dot is well secured!}