Announcement

Collapse

HUG - here for all audio enthusiasts

INTRODUCTION- PLEASE READ FIRST TO UNDERSTAND THIS FORUM!

"This Harbeth User Group (HUG) is the Manufacturer's own managed forum dedicated to natural sound, realisable by controlling the confounding variables between tthe microphone and the listeners' ears.

For example, the design of and interaction between the hifi amplifier and its speaker load can and potentially will alter the sound balance of what you hear. To reproduce the sounds captured by the recording microphones, as Harbeth speakers are designed to do, you would naturally select system components (sources, electronics, cables and so on) that do not color the sound before it reaches the speakers.

Identifying components for their system neutrality should, logically, start with the interpretation and analysis of their technical, objective performance, as any and every deviation from a measurably flat frequency response at any point along the serial chain from microphone to ear is very likely to cause the total system to have an audible sonic personality. That includes the contribution of the listening room itself.

HUG specialises in making complex technical matters simple to understand, aiding the identification of audio components likely to maintain a faithful relationship between the recorded sound and the sound you hear. With our heritage of natural sound, HUG cannot be really be expected to guide in the selection, approval, endorsement or even discussion of equipment that is intend to introduce a significantly personalised sound to the audio signal chain. For that you should do your own research and above all, make the effort to visit an Authorised Dealer and listen to your music at your loudness on your loudspeakers through the various electronics offered there. There is no on-line substitute for that time investment in a dealer's showroom.

If you desire to intentionally tune your system sound to your personal taste, please consider carefully how much you should rely upon the subjective opinions of strangers. Their hearing acuity and taste will be different to yours, as will be their motives and budget, their listening distance, listening loudness and listening room treatment, not necessarily leading to appropriate equipment selection and listening satisfaction for you.

Alternatively, if faithfully reproducing the sound intended by the composer, score, conductor and musicians over your speakers is your audio dream, then understanding something of the issues likely to fulfill that objective is what this forum has been helping with since 2006. Welcome!"


Jan. 2018
See more
See less

Question about stands for Harbeth SHL5

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Question about stands for Harbeth SHL5

    About the Stands I want to ask if is better light or heavy stands.

    Have I to put SHL5 directly on the stands or is it better to put it on three points or blu tack ?

    thanks

  • #2
    It's a personal choice

    Hi, Sibelius, light or heavy is probably more a question of visual preference. I prefer heavy (filled Skylan stands) at its more stable. Whats important is getting the correct height.

    Also don't use blu tack as it can pull of the veneer if your not carful. best to use non tacky 'dots' such as rubber or cork.

    Speaker directly on stands is fine but may mark the bottom of speakers. A small piece of cloth would help.

    Comment


    • #3
      So many opinions, many contradictory

      Hi Sibelius,

      There are many discussions on this subject on the HUG and almost as many opinions. I suggest you have a look to this section of the forum "Stands and mounting discussion". You will find plenty of information.

      Usually, users agree on the fact that the main tweeter be place at ear level when listening to music. Plus, the stand must be stable and safe. After, there are many choices from a cheap DIY cardboard stand like I have since two years with excellent results to a $1000 USD stand.

      You will find that some people don't put anything between their stands and their speakers, others put some small pieces of rubber or different materiel but blu-tack may domage the finish of your speaker when you'll try to remove it. I suggest that you tried many combinations and listen then decide which one you prefer.

      Sébastien

      Comment


      • #4
        Something Solid

        Best stands I have found are the Something Solid XS, a light, rigid, open frame on which thje speaker sits on carbon fibre pucks.

        Comment


        • #5
          Ligth, stiff, inert

          Light and stiff and non-ringing... Best I have tried (and not too expensive) are Skylan (filled about 1/2 - 3/4 with kitty litter) and open frame stands from Custom Design (filled with sand just until in doesn't ring anymore)

          Comment


          • #6
            Italian stahnds (heavy)

            Hello everyone, these are the stands that I bought, built by an Italian craftsman. Really heavy.

            Click image for larger version

Name:	prodotti_modelli_su_richiesta_foto_2.jpg
Views:	1
Size:	25.4 KB
ID:	62275

            I'll try the tips directly under the speaker (as many in Italy recommended) and then without. Sorry for my English, I know only the German and French.

            {Moderator's comment: BE CAREFUL about suing BluTak or similar. When you try to remove it IT CAN RIP-OFF THE VENEER.}

            Comment


            • #7
              Nice looking stands.

              Those look great. Please post a pic (a little larger if possible) once you have your SHL5s on them.

              Comment


              • #8
                The dangers of BluTak after many months/years

                {Moderator's comment: BE CAREFUL about using BluTak or similar. When you try to remove it, IT CAN RIP-OFF THE VENEER.}

                ahhh .... ok, thanks. Already removed.

                Comment


                • #9
                  Pictures

                  Originally posted by P.C. View Post
                  Those look great. Please post a pic (a little larger if possible) once you have your SHL5s on them.
                  Hello S.P., with pleasure, as soon as possible..

                  Comment

                  Working...
                  X