Announcement

Collapse

HUG - here for all audio enthusiasts

INTRODUCTION- PLEASE READ FIRST TO UNDERSTAND THIS FORUM!

"This Harbeth User Group (HUG) is the Manufacturer's own managed forum dedicated to natural sound, realisable by controlling the confounding variables between tthe microphone and the listeners' ears.

For example, the design of and interaction between the hifi amplifier and its speaker load can and potentially will alter the sound balance of what you hear. To reproduce the sounds captured by the recording microphones, as Harbeth speakers are designed to do, you would naturally select system components (sources, electronics, cables and so on) that do not color the sound before it reaches the speakers.

Identifying components for their system neutrality should, logically, start with the interpretation and analysis of their technical, objective performance, as any and every deviation from a measurably flat frequency response at any point along the serial chain from microphone to ear is very likely to cause the total system to have an audible sonic personality. That includes the contribution of the listening room itself.

HUG specialises in making complex technical matters simple to understand, aiding the identification of audio components likely to maintain a faithful relationship between the recorded sound and the sound you hear. With our heritage of natural sound, HUG cannot be really be expected to guide in the selection, approval, endorsement or even discussion of equipment that is intend to introduce a significantly personalised sound to the audio signal chain. For that you should do your own research and above all, make the effort to visit an Authorised Dealer and listen to your music at your loudness on your loudspeakers through the various electronics offered there. There is no on-line substitute for that time investment in a dealer's showroom.

If you desire to intentionally tune your system sound to your personal taste, please consider carefully how much you should rely upon the subjective opinions of strangers. Their hearing acuity and taste will be different to yours, as will be their motives and budget, their listening distance, listening loudness and listening room treatment, not necessarily leading to appropriate equipment selection and listening satisfaction for you.

Alternatively, if faithfully reproducing the sound intended by the composer, score, conductor and musicians over your speakers is your audio dream, then understanding something of the issues likely to fulfill that objective is what this forum has been helping with since 2006. Welcome!"


Jan. 2018
See more
See less

Wood Veneers: what's available?

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Wood Veneers: what's available?

    Hi Alan,

    I noticed on the Super HL5 page that it said to inquire about wood veneers other than cherry or eucalyptus: I have furniture finished in black walnut - is it possible to order the HL5's in a walnut veneer?

    I was going to post a small photo of my walnut equipment cabinet but if I understand correctly I can't do that here, so instead here's a link with a similar photo located near the bottom of the page: http://www.6moons.com/audioreviews/omega6/super3.html.

    Kind regards,

    Jeff
    Last edited by Jeff Day; 02-09-2006, 01:38 AM. Reason: Added link to photo

  • #2
    Re: Wood Veneers

    Originally posted by Jeff Day
    ... it said to inquire about wood veneers other than cherry or eucalyptus: I have furniture finished in black walnut - is it possible to order the HL5's in a walnut veneer?
    Jeff: we have taken a very pragmatic overview of the 'exotic' veneers recently. As a result we have decided to concentrate on cherry and eucalyptus as the 'standard' veneers that Harbeth offer and tiger ebony as the exotic alternative. Our cabinet maker simply will not play ball with small orders of exotic veneers at a sensible price. In fact, I have been shocked that by far the least profitable speakers we make are those in exotic veneers despite their high price: we simply are not able to recover the cost premium.

    Looking at the group of eight cabinets in a column on the right of your link, our tiger ebony is closest to picture number 3 and yes, SHL5 is available in tiger ebony but at a premium price.

    As for walnut, we could reintroduce it but only if there is enough demand worldwide. I wouldn't mind seeing walnut again.

    You may be surprised to hear that the wastage of veneer is a typically heartbreaking 50% during the production of speaker cabinets due to blemishes in the leaves (leaf = strip of veneer), necessity of stitching together narrow strips to cover the width of the cabinet with some overage, splitting, feathered ragged edges, odd stains and natural features deemed unacceptable and of course this has to be paid for. One thing I recently discovered is that those trees on the edge of the forest are prone to flexing in the wind. This has a particular effect on cherry trees where the grain structure can vary markedly along the length.
    Alan A. Shaw
    Designer, owner
    Harbeth Audio UK

    Comment


    • #3
      Re: Wood Veneers

      Hi Alan,

      I have got a SHL5 of Rosenut in Colour? Does this mean not orginial?

      regards,
      Paul


      Originally posted by A.S.
      Jeff: we have taken a very pragmatic overview of the 'exotic' veneers recently. As a result we have decided to concentrate on cherry and eucalyptus as the 'standard' veneers that Harbeth offer and tiger ebony as the exotic alternative. Our cabinet maker simply will not play ball with small orders of exotic veneers at a sensible price. In fact, I have been shocked that by far the least profitable speakers we make are those in exotic veneers despite their high price: we simply are not able to recover the cost premium.

      Looking at the group of eight cabinets in a column on the right of your link, our tiger ebony is closest to picture number 3 and yes, SHL5 is available in tiger ebony but at a premium price.

      As for walnut, we could reintroduce it but only if there is enough demand worldwide. I wouldn't mind seeing walnut again.

      You may be surprised to hear that the wastage of veneer is a typically heartbreaking 50% during the production of speaker cabinets due to blemishes in the leaves (leaf = strip of veneer), necessity of stitching together narrow strips to cover the width of the cabinet with some overage, splitting, feathered ragged edges, odd stains and natural features deemed unacceptable and of course this has to be paid for. One thing I recently discovered is that those trees on the edge of the forest are prone to flexing in the wind. This has a particular effect on cherry trees where the grain structure can vary markedly along the length.

      Comment


      • #4
        Re: Wood Veneers

        Why are you concerned? The email you quoted is over a year old. Rosenut is available to special customer order.
        Alan A. Shaw
        Designer, owner
        Harbeth Audio UK

        Comment


        • #5
          Re: Wood Veneers

          Hi Alan,
          Thanks for the quick reply. Just to make sure that the speaker bought is original, and probably going to keep this speaker long.

          Originally posted by A.S.
          Why are you concerned? The email you quoted is over a year old. Rosenut is available to special customer order.

          Comment


          • #6
            Re: Wood Veneers

            Pleasure.

            By the way, we are soon to launch online registration. We're just testing the code now.
            Alan A. Shaw
            Designer, owner
            Harbeth Audio UK

            Comment


            • #7
              Re: Wood Veneers: what's available?

              That is a Great News.. so the product can be registered and confirmed from any part of the world. Thanks,

              Paul

              Comment


              • #8
                Re: Wood Veneers: what's available?

                Yes. But please consider the ramifications of buying in country A (and we can tell from the serial number which market we originally supplied the speakers to) and then registering in country B.
                Alan A. Shaw
                Designer, owner
                Harbeth Audio UK

                Comment


                • #9
                  Re: Wood Veneers

                  Originally posted by A.S.
                  Pleasure.

                  By the way, we are soon to launch online registration. We're just testing the code now.
                  Alright! This is GREAT! :D :D :D Cheers to you A. S. !!

                  Comment


                  • #10
                    Rosewood veneer is available again!

                    Great news!

                    I'm pleased to say that we're able to offer beautiful Santos Rosewood veneer again! Rosewood will be available again in these models ....

                    P3ESR
                    C7ES3
                    SHL5
                    Monitor 40.1

                    But please remember we have an order pipeline! We can't deliver immediately! But it is very beautiful as you can see.
                    Attached Files
                    Harbeth PR,
                    Harbeth UK

                    Comment


                    • #11
                      Rosewood veneer

                      Hi,

                      Please post pictures of the Santos Rosewood veneer.

                      Thanks

                      Comment


                      • #12
                        Rosewood veneer

                        ?????

                        The rosewood picture was attached to my post.
                        Harbeth PR,
                        Harbeth UK

                        Comment


                        • #13
                          Re: Wood Veneers: what's available?

                          Wow..lovely..may I know what is the additional price for this finishing?
                          "Bath with Music"

                          Comment


                          • #14
                            Rosewood veneer price for P3ESR

                            Yes, we are really thrilled to be offering rosewood again as you can see yourself! We are so confident in the P3ESR and in its rosewood clothing that we have struck a really good deal with our cabinet maker. I'm not sure if this price premium can be offered in the long term as costs are always rising, but initially the rosewood UK retail price is about only approx. 7% of a premium on the standard, popular cherry veneer. I don't know how this will translate into a street price in our export markets.

                            I have no information from Production as to how long this introductory price will last.
                            Harbeth PR,
                            Harbeth UK

                            Comment


                            • #15
                              Re: Rosewood veneer

                              Originally posted by harbethpr View Post
                              ?????

                              The rosewood picture was attached to my post.
                              OK, seen it and thanks

                              Comment

                              Working...
                              X