HUG - here for all audio enthusiasts

At its inception ten years ago, the Harbeth User Group's ambition was to create a lasting knowledge archive. Knowledge is based on facts and observations. Knowledge is timeless, independent of the observer and can be replicated. However, we live in new world in which objective facts have become flexible, personal and debatable. HUG operates in that real world, and that has now been reflected in the structure of HUG.

HUG has two approaches to contributor's Posts. If you, like us, have a scientific mind and are curious about how the ear works, how it can lead us to make the right - and wrong - decisions, and about the technical ins and outs of audio equipment, how it's designed and what choices the designer makes, then the factual Science of Audio sub-forum area of HUG is your place. The objective methods of comparing audio equipment under controlled conditions has been thoroughly examined here on HUG and elsewhere and can be readily understood by non-experts and tried-out at home without deep technical knowledge.

Alternatively, if you just like chatting about audio and subjectivity rules for you, then the Subjective Soundings area is you. If upon examination we think that Posts are better suited to one sub-forum than than the other, they will be redirected during Moderation, which is applied throughout the site.

Questions and Posts about, for example, 'does amplifier A sounds better than amplifier B' or 'which speaker stands or cables are best' are suitable for the Subjective Soundings area. From Oct. 2016, Posts in the Subjective Soundings area will not be spell checked or adjusted for layout clarity. We regret that but we are unable to accept Posts that present what we consider to be free advertising for products that Harbeth does not make.

The Moderators' decision is final in all matters and Harbeth does not necessarily agree with the contents of any member contributions and has no control over external content.

That's it! Enjoy!

{Updated Jan. 2017}
See more
See less

remove Harbeth logo from the grille

  • Filter
  • Time
  • Show
Clear All
new posts

  • remove Harbeth logo from the grille

    Is there any way to remove the Harbeth logo from the grille of my wonderful M30s? Can I do that without damaging the grille and in a way that there will not remain any stain on the grille? Just pull...?
    There are too many logos staring at us in this world which has led to my preference to reduce them at home at least. (I would never buy a shirt with a logo on the back for that matter...) Nevertheless I will remain a happy owner - and isn't a Harbeth the perfect understated loudspeaker anyway??

  • #2
    Re: remove Harbeth logo from the grille

    You could try gently heating the back of the logo with a hair drier. This should soften the glue allowing you to peel it off but beware, it might well leave a glue residue. Personally, I would keep the logo where it is.


    • #3
      Re: remove Harbeth logo from the grille

      you should be proud to own a let it be there...


      • #4
        Re: remove Harbeth logo from the grille

        While I can be proud of my daughter, I would rather say I am a very happy owner and user when it comes to the Harbeth. Indeed it's a daily source of joy!

        In case nobody has noticed, the dimensions of the M30 are quite close to the golden ratio when you seen them from the front (they are 460mm high while the golden ratio would require them to be 448mm high), which is one of the reasons why they are such a pleasure to look at. The logo does not really do them justice in my opinion. It's a little like leaving the logo on the sleeve of an elegant sports jacket or trenchcoat, if you know what I mean... We do live in a logo obsessed world by all means!
        Anyway, this is as geeky as it can get I suppose!!!


        • #5
          Re: remove Harbeth logo from the grille

          It would probably taken weeks or months for the Harbeth's designer/owner to come up with the name and design and probably more man hours before deciding where to put the Harbeth Logo. Not to mention the type of glue selected to stick the logo so that it doesn't damage the special grille cloth. Maybe, you could ask if Harbeth would make custom designed Harbeth Logo for extra costs as I doubt Harbeth would let someone to take away their pride from speakers.



          • #6
            Re: remove Harbeth logo from the grille

            The name 'Harbeth' comes from the companies founder Dudley Harwood and his wife, Elizabeth.

            We could have had 'WoodE' or 'Dudbeth'



            • #7
              Removing grille logo

              I would have to agree that I would have preferred that the logo was removable. I don't need to be told they are Harbeth's, and as far as other people who come into my house to listen, they are all told that are fortunate enough to be listening to music through them.

              It really comes down to each person's personal taste, and to the fact that some of us would rather not stare at the logo, because, undoubtably, we like the looks of it without the somewhat large logo on the front of the loudspeaker. It would be nice to have the option to remove it without damaging the front grille, without glue and without a tear or hole.

              {Moderator's comment: we can't win. When we used weak glue the badges dropped off, sometimes even in transit due to temperature change. So we Superglue them on now and that problem is totally resolved. Sorry but we are not revisiting that - it is solved.}


              • #8
                Logo badge

                I actually prefer the older Harbeth logo. Though smaller but more classic looking IMHO. In any case, i'd never remove the logo from the grille.

                {Moderator's comment: oddly enough when we changed the badge a few years ago, sales started to increase. Coincidence? Better promotion and awareness?}


                • #9
                  Just curious: would Harbeth entertain this (i.e. a "no logo" version) as a custom option on a new order?

                  {Moderator's comment. No! The badge is part of our brand awareness!}


                  • #10
                    Proud to see the logo

                    I for one am proud to have the Harbeth logo on my P3's. These are outstanding speakers and their designer and the Harbteh team have earned the brand awareness. I have rarely come across a product or brand with the overall positive feedback that Harbeth gets. The logo is simple and understated. Fits in beautifully with the speakers overall aesthetic. Let the sound draw your eye to the logo, as it should be.
                    Last edited by Art K; 13-02-2011, 04:24 PM. Reason: spelling


                    • #11

                      {Moderator's comment: we can't win. When we used weak glue the badges dropped off, sometimes even in transit due to temperature change. So we Superglue them on now and that problem is totally resolved. Sorry but we are not revisiting that - it is solved.}
                      My badge keep slipping off even with slight handling. That is rather annoying. May I know what superglue do you use?


                      • #12
                        Deliberately remove grille logos

                        I bought my M30's used with missing logos. The previous owner had them removed, and there are no visible marks that there was a logo there before. I however don't now how he did it.
                        I am very proud of my Harbeths, but i totally get your point about logos, i do the same thing. Especially when it comes to Hi-Fi and listening, i don't want distracting text in front of me when listening.
                        I did the same thing with my 15 Ohm Chartwells, wich proabably wasn't very smart if i'd ever want to sell them to a collector..


                        • #13

                          Really we are talking about removing a logo. Wow don't we have better things to do this is a real laugher. I'm speechless��