Results 1 to 15 of 15

Thread: Almost new owner questions (SHL5 cables)

  1. #1
    ErikM Guest

    Default Almost new owner questions (SHL5 cables)

    Hi fella'a I have a pair of SHL5 (in eucalyptus) on order and have been reading through many posts on these speakers. I know what the Harbeth folks think about speaker cables but I was wondering if there are any favorites and consensus on good choices. I'll be using a Plinius 9200 to drive the speakers, I'm thinking of either Kimber Monocle XL, or select 3033, Audience Au24e, Synergistic Accelerator, Wireworld Eclipse 6... any and all opinions are welcome.

    The Harbeths are replacing Proac Response D25 which although are great speakers I'm finding a bit too bright with solid state electronics.

  2. #2
    Join Date
    Nov 2010

    Default Proac > Harbeth

    Wahay! A fellow Proac to Harbeth owner. Me - just replaced D15s with P3ES2s. What a great change; you won't regret it.

    Wish I could contribute to your cable question. I have too little budget and experience to experiment. The only comparison I have made is between single and biwire. I have Chord Rumour 4 biwire cable and have used it in both configurations with my Harbeths. I prefer single; it seems to give a more coherent sound. I wouldn't like to attempt a double-blind test though—the difference is subtle and quite possibly all in the mind.

    All the best, Ben

  3. #3
    honmanm Guest

    Default KISS principle (Keep it simple stupid)

    How about starting with something inexpensive and middle-of-the-road? Seeing as you will need to get used to the sound of new speakers, having a cable that "tailors" the sound in any way would just confuse the issue. A starting point might be the sort of thing your dealer recommends for a NAD amplifier (or equivalent in that price range) - as long as it is neutral. Try it with the D25s before they go, so that you know if it has any signficant contribution to sound quality (or lack thereof).

    Other than that, you could stick with your current cable which will mean that the only variable you're changing is the speakers themselves.

  4. #4
    Join Date
    May 2009

    Default Cables

    IMO, when it comes to cables, keep it good and simple. Good quality wire, wrapped in a good quality insulation. Not too many strands because this makes for a fat, fuzzy sound and (this is purely personal) I don't like cables with boxes on. You never can find out what these boxes do but I believe they act like tone controls or filters but confuse the sound.

    And don't spend huge amounts on cables.

  5. #5
    Join Date
    Feb 2006

    Default Harbeths can resolve cable differences

    Hi, Erik

    Any of those will work, and in fact, you may be able to get by on less money; but don't doubt for a second that your Harbeths will be able to resolve the differences between brands! Of the cables listed, I'm a big fan of Kimber, using the humble Hero interconnects and 8 TC speaker cable with my Monitor 30's.

    Good Hunting-it's part of the fun!

  6. #6
    Join Date
    Jul 2010

    Default Kimber fan

    Also a Kimber fan. I've used PBJ interconnects for years, and got a pair of 4TC speaker cables a couple of years ago. That's about as "high-end" as I'll ever need...

  7. #7
    LarsS Guest


    I would say it is quite impossible to tell you what is best for your ears and system
    but the best thing with budget cables is that it gives you a chance to experiment
    without going broke. I am currently using a Van Damme HIFi cable 4mm with my SHL5
    and it is really good for the price costing less for 8m than a "better" cable cost for 1m.
    This is a VERY subtle subject and at times I feel a solid core cable sounds less detalied but more musical. Have been thinking of anticables too as an alternative.

  8. #8
    ErikM Guest

    Default Again cables

    Thanks guys. Honmanm my current cables are Cardas Golden Reference Bi-Wire which cost about as much as the freakin' speakers! I've sold them to actually pay for part of the Harbeth purchase. I'm actually leaning towards the Audience Au24e single wire, with Au24e jumpers... Au24e is a simple high quality copper wire. But I'm currently using Kimber KS1030 interconnects so I'm also going to give the Kimber Monocle XL a shot.

    And yes I think the idea about trying some things on the D25 before they go is a good idea, although what works well on the Proac's won't necessarily be a good match on the Harbeths, but it would give me an idea.

  9. #9
    Join Date
    Jan 2010

    Default Classic 79 strand - best results

    Hi Erik,
    I would recommend you QED Classic 79 Strand. I have the best results with these cables in my setup. They are very cheap ($3/m) but very good. I tried on a lot of cables, much more expensive, but these QEDs are the best. It seems to be a good matching with Harbeths.

  10. #10
    Join Date
    Nov 2009
    Piraeus, Greece

    Default $10/mtr is more than enough to spend on cables

    Quote Originally Posted by ErikM View Post
    .... I've sold them to actually pay for part of the Harbeth purchase....
    That was a clever thing to do. Don't spend a lot on cables. Before you buy, try a very cheap and trust your ears. In any case, $10 per metre is more than enough.

  11. #11
    ErikM Guest

    Default I'll try cables before spending $$$

    Thanks for the input guys. I'm fortunate to live in the USA where we have a company called : The Cable Company ( ) You can probably guess what they do :-) They are about 20minutes from my house so I'll get a chance to try out numerous cables in my system before shelling out the $$$

  12. #12
    HOLBERG Guest

    Default Atlas cables

    Try also looking at Atlas Cables.

    You don´t have to spent a fortune with these and they have a wide range of cables to choose from. They are truely great. What You get is high quality build and materials. Most important You get rewarded with GREAT sound and value in every aspect.

    I have had cables from Yter, Audience, Artisan, Kimber, Nordost and more. I don´t miss a thing with the Atlas Cables and I´ve stoppede looking for other cables since I got them. They are here for the lon run!

    My Atlas cables are as follows:

    - Interconnects: Titan All Cu

    - Speakercables: Ascent 2.0

  13. #13
    Join Date
    Feb 2006

    Default Spetz anti-cables

    If you can stand the look of bare wire, try Spetz anti-cables. They are cheap (very) and are a good match with my SHL5/CJ MV125 combination.


  14. #14
    ErikM Guest

    Default Kimber etc.

    I've ended up with Kimber Monocle XL with Kimber Select 9033 jumpers.. I preferred it over Synergistic Tesla Accelerator, and Acoustic Zen Hologram. Fwiw I also use use Kimber Select KS1030 interconnect between Dac and Amp so that may have added to the overall synergy. And unfortunately Holberg, Atlas cables AFAIK, aren't available in the US. At least I couldn't find them to try.

  15. #15
    Join Date
    Jan 2008

    Default Qed79

    Harbeth's recommendation of QED 79 is a good one!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts