Announcement

Collapse

INTRODUCTION - PLEASE READ FIRST TO UNDERSTAND THIS FORUM!

"This Harbeth User Group (HUG) is the Manufacturer's own managed forum dedicated to natural sound from microphone to ear, achievable by recognising and controlling the numerous confounding variables that exist along the audio chain. The Harbeth designer's objective is to make loudspeakers that contribute little of themselves to the music passing through them.

Identifying system components for their sonic neutrality should logically proceed from the interpretation and analysis of their technical, objective performance. Deviations from a flat frequency response at any point along the signal chain from microphone to ear is likely to give an audible sonic personality to the system at your ear; this includes the significant contribution of the listening room itself. To accurately reproduce the recorded sound as Harbeth speakers are designed to do, you would be best advised to select system components (sources, electronics, cables and so on) that do not color the sound before it reaches the speakers.

For example, the design of and interaction between the hifi amplifier and its speaker load can and will alter the sound balance of what you hear. This may or may not be what you wish to achieve, but any deviation from a flat response is a step away from a truly neutral system. HUG has extensively discussed amplifiers and the methods for seeking the most objectively neutral among a plethora of product choices.

HUG specialises in making complex technical matters simple to understand, getting at the repeatable facts in a post-truth environment where objectivity is increasingly ridiculed. With our heritage of natural sound and pragmatic design, HUG is not the best place to discuss non-Harbeth audio components selected, knowingly or not, to introduce a significantly personalised system sound. For that you should do your own research and above all, make the effort to visit an Authorised Dealer and listen to your music at your loudness on your loudspeakers through the various offerings there. There is really no on-line substitute for time invested in a dealer's showroom because 'tuning' your system to taste is such a highly personal matter. Our overall objective here is to empower readers to make the factually best procurement decisions in the interests of lifelike music at home.

Please consider carefully how much you should rely upon and be influenced by the subjective opinions of strangers. Their hearing acuity and taste will be different to yours, as will be their motives and budget, their listening distance, loudness and room treatment, not necessarily leading to appropriate equipment selection and listening satisfaction for you. Always keep in mind that without basic test equipment, subjective opinions will reign unchallenged. With test equipment, universal facts and truths are exposed.

If some of the science behind faithfully reproducing the sound intended by the composer, score, conductor and musicians over Harbeth speakers is your thing, this forum has been helping with that since 2006. If you just want to share your opinions and photos with others then the unrelated Harbeth Speakers Facebook page http://bit.ly/2FEgoAy may be for you. Either way, welcome to the world of Harbeth!"


Feb. 2018
See more
See less

Best way to remove grille on Harbeth SHL5 plus

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Best way to remove grille on Harbeth SHL5 plus

    Hi guys,
    I just bought a pair of SHL5+. Due to new pair its hard to remove the grille off the speakers. Im scared that i will damage it.. Whats the best way to take it out?

    Cheers,
    Kyle

    {Moderator's comment: as the speaker is designed to be used with the grilles on, I'd just leave them alone.}

  • #2
    Grilles on

    A.S. is right, they measure flatter and sound better with grilles on, but the way to take them off is with a neo magnet. Very easy to get (Amazon for example).

    {Moderator's comment: The designer does know his creations better than anyone ...}

    Comment


    • #3
      The designer knows.... nothing

      No, the common audio reviewer knows even better!

      In a recent review of a German magazine called "Stereo" there is a highlighted sentence in the article saying: "Grilles? No! Bi-Wiring? Of course yes!".

      (To emphasize: I myself do think that the engineer behind the product has more expertise on that matter)

      Comment


      • #4
        After a lot of research the best way I found is to unfold a paper clip (not completely, just one half), bend it as a hook and introduce it gently in the top corner of the grilles.

        Comment

        Working...
        X